Leave a comment:
Dear Spammers and Trolls: All comments are checked by myself before publishing!
The manual inspection is why it takes some time until your text appears in the comment section (as long as it passes my inspection) - be patient...

I don't answer comments by mail!
Note the rules and my mail address in the column contact!

Norbert

Name:

Comment:

Formular:

----------------------------------------------------

Page: technics-machines-3D-printer-Syringe-Extruder_en.htm
Date: 2023.02.24 16:52:06 (UTC+1)
Name: Doug Noel

Comment:
It looks like in figure 7 you have 4 smaller screw and in figure 6 it looks like they're used to hold the two halves together. What size are these?

I'm going to be trying this with an Ender-3 S1 Pro. Any advice for trying this out?

Thanks!

Me: These are screws with a diameter of 3mm and yes, they are used to hold the halves together.
My advice: As this is experimental, don't give up if it doesn't work the first time you try it!
Ask more specific questions if you expect more specific advice ;-)
Happy printing!

----------------------------------------------------

Seite: technics-machines-3D-printer-Syringe-Extruder_ge.htm
Datum: 2022.02.16 08:49:00 (UTC+1)
Name: Felix Meiser

Kommentar:
Hallo,
super Seite aber mit Druckfehler auf Seite
Spritzen-Extruder
Abbildung 7
"Materialkompination"
Gruß aus Mensfelden

Me: Danke, der Dreckfuhler ist behoben. Gruß zurück Richtung Hühnerstraße!

----------------------------------------------------

Seite: technics-machines-3D-printer-Syringe-Extruder_ge.htm
Datum: 2022.01.21 09:44:01 (UTC+1)
Name: Carsten

Kommentar:
Ich *will* Gummibärchen Drucker :) Super was Du machst.

       .--.
      |o_o |
      |:_/ |
     //   \ \
    (|     | )
   /'\_   _/`\
   \___)=(___/

Me: Danke! Geschmolzene Gummibärchenmasse braucht aber extrem lange zum fest werden, das klappt (bislang) nicht wirklich.