----------------------------------------------------
Page: technics-base-circuits-constant-voltage_en.htm
Date: 2023.01.22 04:42:28 (UTC+1)
Name: Tim porter
Comment:
Most of your information is over my head. However I have a problem, that to you is probably a simple solution. I drag race 1/24 scale slot cars. Track supplies the voltage which is around 16vdc. But it varies by up to 1 volt. Is was wondering if the is a way I can wire the motor in the car to operate at a lower voltage, say 14 volts, and ensure that the motor is fed a consistent power supply every race, instead of the varying voltage that the track supplies. Reddog@xxxxxxxxxxx.xxx
Me: "the motor" is no sufficient description of a motor. "1/24 scale" also gives me absolutely no idea of what kind of power supply you are talking of. "around 16Vdc" and "varies up to 1V" doesn't make things better...
Also I have clearly written that I don't answer comments by mail.
Time for you to study my chapter Contact.
----------------------------------------------------
Seite: technics-base-circuits-constant-voltage_ge.htm
Datum: 2020.01.22 21:06:26 (UTC+1)
Name: Stefan Kreyl
Kommentar:
Hallo
ist es Möglich in Figure 12 einen Transistor oder einen Mosfet zur Ampere Erhöhung anzuschließen. Die Üblichen Spannungsregler bringen zu wenig Ampere. Danke
Me: Nein, denn dieser zusätzliche Transistor würde über keine Rückkopplung verfügen. Abbildung 11 zeigt eine Schaltung für Konstantstrom mit einem Leistungstransistor.
----------------------------------------------------
Seite: technics-base-circuits-constant-voltage_ge.htm
Datum: 2020.01.08 09:43:24 (UTC+1)
Name: florian
Kommentar:
ihr müsst den Artikel nochmal überprüfen
Me: Nur wenn du GENAU sagst, warum.
----------------------------------------------------
Seite: technics-base-circuits-constant-voltage_ge.htm
Datum: 2019.01.19 13:17:08 (UTC+1)
Name: yoyo
Kommentar:
Wie könnte man ein Regelbares Labor Netzteil verwirklichen?
Me: Das lässt sich jetzt nicht in einem Kommentar beantworten, ich werde aber bei Gelegenheit etwas tiefer in diese Materie eintauchen.
----------------------------------------------------
Page: technics-base-circuits-constant-voltage_en.htm
Date: 2015.04.18 at 23:56:16 (UTC+1)
Name: Andre
Comment:
Hi i need help about like model inverted pendulum, i want to do the analogic controller , and to use your bridge h ,a the question is like insert the signal control for gereting pwm control, excuse me my english , i am from brazil i nerver did course the english language.
I wait help me, is for my monograph, thanks
Me: There is a PWM input at the h bridge circuits I have treated in this project, thus I don't know exactly what your question is about. Maybe you ask experts in a Brasilian or Portuguese electronics forum.